Doka Frami Eco

Wall Systems
short description

Simple system-grid 

  • widths from 30 cm to 90 cm in 15-cm increment grids for best-possible adaptation to the structure
  • practical heights of 1.20 and 3.00 m
  • 75 cm wide universal panel for outside corners, columns and end-shuttering
  • larger gang-forms for fast repositioning with crane possible

Frami clamp 

  • one blow of the hammer on the Frami clamp is all it takes to pull the panels together and achieve a flush, correctly aligned panel joint that is resistant to tensile forces
  • no need for extra stiffening reinforcements

Conteinuous height mismatch 

  • continuous hardware slot in the frame for fixing the Frami clamp anywhere on the frame
  • continuous height mismatch without pre-defined increment-grid
  • easy accommodation to steps, slopes and uneven ground, without extra work

Utilisation

In use across the entire room height

  • only three form ties per 300 cm panel height
  • permitted fresh-concrete pressure: 60 kN/m²
  • cost-effective forming of stop-ends, outer corners and columns through special hole pattern in the 75 cm wide Frami eco universal panel
  • an extensive range of accessories ensures safety when pouring


Used for foundations

  • the Frami tie-holder bracket relocates the form tie above the panel (form tie not in concrete) for flexible positioning
  • foundation anchoring system consisting of flat tie rods and Frami clips
  • for walls between 10 cm and 80 cm thick in a 5-cm increment-grid
  • no anchoring through concrete
  • no supporting timbers required
  • the bottom of the panel is fixed with foundation clamps and perforated tape